MakerFaire: Arduino Materia 101 – first contact

 

Materia 101 main

Introduction

And the day came at the Maker Faire Rome 2014, for the highly anticipated official presentation of the first 3D printer brand Arduino, with the evocative name of “Materia” 101, as if to stimulate the “demiurgic” abilities of future users.

It is, as reported by both the Arduino and Sharebot sites, a device designed and developed in Italy by the two companies, which are absolute excellences in the world of open hardware philosophy.

Fig. 1: Arduino Materia 101

Fig. 1: Arduino Materia 101

Description

The Materia 101 was, needless to say, the star of Arduino stand at Maker Faire.

This is a mono extruder printer that uses Fused Filament Fabrication printing technology, which makes use of filaments of polylactic acid (PLA), controlled by Arduino Mega 2560 board with Open Source Marlin (DRM) Firmware.

MakerFaire - Arduino Mega

Fig.2: Arduino Mega 2560

The first visual impression is that of a product from the clean and simple design, but anyway captivating, built with quality materials; after all Sharebot, in turn present at Maker Faire with a very interesting stand, from this point of view is a warranty.

According to the company from Ivrea, the choice of essentiality of design and the white color should communicate the idea of ​​ease of use of the printer; the result is also pleasing to the eye, then so much the better.

The chassis is compact (310 x 330 x 350 mm), accordingly the printing area is limited (140 x 100 x 100 mm +/- 5 mm), but adequate stated that the intent is to provide an educational product, ideal for those approaching the world of rapid prototyping. Pricing: less than 600 euro for the kit version, less than 700 euro for the pre-assembled one.

I Personally found interesting the idea of ​​adopting, for the PLA filament, a dispenser separate from the printer chassis. To subtract a potentially vibrant mass to the structure of the printer, that is all in all quite light (10 kg), should go in favor of print quality.

Fig. X: La stampante Materia 101 allo stand Arduino

Fig. 3: Materia 101 at Arduino stand

The technical characteristics show  X and Y theoretical resolution position of 0.06 mm and Z resolution position of 0.0025 mm. The print quality, as seen from the reproduction of Arduino’s logo in the picture below, doesn’t hail you as a miracle, but it is quite good for a printer that promises to cost less than 700 euro.

MakerFaire - Materia 101 printed

Fig.4: The Arduino logo printed by Materia 101

Below is a video showing the Materia 101 specimen in Arduino stand, at work.

 

In addition to PLA, the printer has been tested with the following types of filaments: Cristal Flex, PLA Thermosense, Thermoplastic Polyurethane (TPU), PET, PLA Sand, PLA Flex.

The most careful observers would have noticed a striking resemblance between Arduino Materia 101 and Sharebot Kiwi-3D printers. In fact, comparing the technical characteristics of Materia 101, shown below, with those of Kiwi-3D, shown in the user manual which can be downloaded from Sharebot website, the two printers seem to be identical; in one case it refers  to  an Official Arduino Mega 2560 electronic board, in the other one to a compatible Arduino Mega 2560 electronic board… in any case, the prices of the two machines are comparable and Materia is even more beautiful!

MakerFaire - Materia e Sharebot

Fig.5: Arduino Materia 101 and Sharebot Kiwi3D

 

Technical characteristics:

Printing technology: Fused Filament Fabrication
Printing area:  140 x 100 x 100mm +/- 5mm
X and Y theoretical resolution position:  0,06mm
Z resolution:  0,0025mm
Extrusion diameter: 0,35mm
Filament diameter: 1,75mm
Optimal temperatures with PLA: 200-230°
Tested and supported filaments: PLA
Unsupported but tested filaments:  Cristal Flex, PLA Thermosense, Thermoplastic Polyurethane, (TPU), PET, PLA Sand, PLA Flex
External dimensions: 310 x 330 x 350mm
Weight: 10 kg
Usage: 65 watt
Electronic board: Official Arduino Mega 2560 with Open Source Marlin Firmware
LCD display: 20 x 4 with encoder menu
Other: Preloaded with PLA printing presets

Extruder block with filament pressure regulation

Conclusions

Arduino’s  official debut in the field of 3D printers is a product characterized by good build quality and printing precision at a very competitive price and intended for beginners of additive manufacturing and Arduino’s  fans, of course.

 

 

3 Comments:

  1. Complimenti Alberto, anche se non è il mio campo di competenza, l’ho trovato molto interessante ed utile.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.