This article will start with a general overview to further deepen and analyze the serial communication in detail.
In this article I will to present some software for the design of electronic circuits I believe to be relevant. Several criteria are taken into account before drawing up this list: there are free software, commercial software, shareware software.
In recent years in the field of electrical plant engineering, especially with regard to the maintenance of plants and equipment in general, Thermography has developed considerably: a term derived from the Greek words "thermos" that It means hot and "grafphen" which means drawing or drawing the heat, a non-invasive diagnostic technique that allows to identify surface temperature values without coming into direct contact with the electrical components through the Visualization and measurement of the thermal energy emitted by an object.
Unfortunately, even today sockets and plugs for domestic use are electrical components that have not yet undergone any form of unification mainly due to the resistance of the different countries to abandon their system.
the battery has become the fundamental element of the portable electronic equipment, and not only, the possibility to have large amounts of power and be able to provide in long times by means of a lightweight system and large capacity is of considerable importance in other fields such as cars and storage of large quantities of energy.
Following my previous article a useful manual on digital terrestrial television with which I analyzed globally the digital terrestrial system, from production to transmission until reception, with this article I would like to analyse and Describe in detail a reception plant, both for a single unit and centralized for more units, starting from the description and analysis of the various components to the distribution of the signal up to the design and the final Installation.
The digital television transmission, beyond inevitable problems of realization and running-in due mainly to a too hasty choice without having made first a better dislocation of the transmission sites with the relative diagrams of Irradiation, represents a very important step towards the realization of future interactive services of the television equipment
Only a few months to November 1, 2014, the date when the Standard IEC 60439-1 (for low voltage switchboards) will be permanently repealed, and replaced by the new IEC 61439-1 and 61439-2.
The increasing use of electrical and electronic equipment especially sensitive to surges in low-voltage networks, has made it essential the implementation of protection systems more efficient and targeted particularly to the type of system where such protection is necessary.
The rapid and widespread increase in communication technologies that use electricity has greatly altered the electromagnetic environment around us, in addition to the constant increase in the use of electricity there is an ever increasing use of sources and Devices emitting electromagnetic waves.